K-Tuned

Applications: 12-15 Civic Si  Note: *Fits both Coupe and Sedan *Highly recommended to upgrade the rear engine mount to a HASPORT rear mount t...

Applications:  K20Z3 K24 heads  Note: * Excludes K24A1, K24Z and K24Y Series * Designed to provide greater clearance for sidewinder turbo manifo...

This unique hose is designed to work with K24 and straight upper coolant housing (coolant housing pointed straight towards radiator) and driver sid...

Application:  Universal Our ground wire kit includes two 11" long ground wires. These are great upgrade for old corroded and worn grounds. You...

NEW 2019 Style K-Tuned 90mm Throttle Bodies  KTD-TB9-K10 KTD-TB9-B10 Interchangeable inlets for K-Tuned Throttle Bodies. Easily swap out the st...

Applications:   K-Series KTD-TB8-RBC  K-Series KTD-TB8-IAK  B-Series KTD-TB8-IAB Note: *If you are unsure which TB you have, please email info...

Applications: K20A/A2/Z1/Z3 All K24A Series Engines Note: * K24 Bracket is based off the CR-V bracket (11910-PPA-000) and will onlt fit the a...

Applications: 06-11 Civic FG 12-15 Civic FG Rear camber kit makes it easy to adjust camber and proper setup and align your car whether that is fo...

Applications: 02-06 RSX DC5 01-05 Civic EM2 01-05 Civic ES1 K-swapped Civic EF, EG, EK  K-swapped Integra DC2 Note: SHIFT CUT SENSOR WIRING INSTR...

Applications:    All K-Series engines Fits K-Tuned Throttle Bodies Note: * Excludes K24Z-Series Engines  * Requires engine management to use (Fla...

Applications: K20A and K24A Style heads Note: * Does NOT fit K24Z Series style head * Available in Raw uncoated, wrinkle black,...

Application: All K24 Engines  Note: *When installing that the adapter gets mounted directly to the head (Do Not Install A Gasket Between The ...

Application:  14-15 Civic FG (Si Only)  Spring Rate: F-8K / R-7K Note: * 25% stiffer damper **For instructions click here** K-Tuned K1R Str...

Application: Remote Mounted Reservoir Note: * Available in three sizes. 1/4" Hose, 3AN, or 4AN K-Tuned CMC Reservoir is a direct replacement ...

Applications:   K-Swapped 92-00 Civic  K-Swapped 94-01 Integra 02-06 RSX 01-05 Civic EP3 06-11 Civic  12-15 Civic  Specifications: * Lenght: 985m...

Application: 12-15 Civic Si with RBC Intake Manifold  Note: * Flashpro or KTuner is REQUIRED * Must use after market Clutch Line to avoid con...

Applications: Dual bolt pattern PRB/PRC and RBC/RRC intake manifold Note: *TPS  02-06 RSX Type S / Type R And EP3 *IACV 02-06 RSX Type S and EP3 ...

Applications: K-Tuned Pulley kits  Note: * Please be sure to count the grooves on your pulley to see if your running a 6 rib or a 7 rib kit Re...

Applications:    All K-series engines   Some of you may be interested in deleting the heater hoses and core from your K-swapped vehicle.  The K...

Applications: 2006-11 Civic SI models. Fits both 2-door coupe and 4-door chassis. Requires light modification to the heat shield. Features:- Fits C...

Applications:  K-Tuned Billet Dip Stick (All Models) Note:  Our retention spring kit is designed for high horsepower k-Series cars running our ...

Applications:  K20 and K24 Valve Covers Note:  * There may be fitments with issues with some baffled oil pans We've redesigned the dip stic...

Applications: 94-01 Integra DC (all models) 92-95 Civic EG 96-00 Civic EK (excluding U.S.A Si and Canadian SIR DOHC cars, welding required)      ...

Applications:  K20A cylinder heads K20A2 cylinder heads K20A3 cylinder heads K20Z1 cylinder heads K24A1 cylinder heads Note: * There is a fitmen...

Application: 3" to 4" Piping Use this high quality 4 ply silicone transition coupler on many setups including K-Tuned Throttle Bodies. All coup...

Application: 3" to 4" Piping Use this high quality 4 ply silicone transition coupler on many setups including K-Tuned Throttle Bodies. All coup...

Application: 3" to 4" Piping Use this high quality 4 ply silicone transition coupler on many setups including K-Tuned Throttle Bodies. All coup...

Application: 3" or 3.5" Piping  Use this high quality 4 ply silicone coupler with 3" or 3.5" piping.

Application: 3" or 3.5" Piping  Use this high quality 4 ply silicone coupler with 3" or 3.5" piping.

Applications:  See applications listed beside the part numbers below. K-Tuned Throttlebody Heatshield Gaskets  KTG-PRB-TB - RSX Throttle Bod...

Applications:  See applications listed beside the part numbers below. K-Tuned Throttlebody Heatshield Gaskets  KTG-PRB-TB - RSX Throttle Bod...

Applications:  See applications listed beside the part numbers below. K-Tuned Throttlebody Heatshield Gaskets  KTG-PRB-TB - RSX Throttle Bod...

Applications:  See applications listed beside the part numbers below. K-Tuned Throttlebody Heatshield Gaskets  KTG-PRB-TB - RSX Throttle Bod...

Applications:  K-Series Heads Note: * Please select the gasket to match the head/manifold Make a little more power with K-Tuned Intake M...

Applications:  K-Series Heads Note: * Please select the gasket to match the head/manifold Make a little more power with K-Tuned Intake M...

Applications:  K-Series Heads Note: * Please select the gasket to match the head/manifold Make a little more power with K-Tuned Intake M...

Applications:  K-Series Heads Note: * Please select the gasket to match the head/manifold Make a little more power with K-Tuned Intake M...

Use this adjustable AN sized aluminum wrenches with our AN fittings to avoid damaging or scratching during installation. Works for sizes 3AN to...

Use these AN sized aluminum wrenches with our fuel fittings to avoid damaging or scratching during installation. Available in 6AN to 16AN for t...

Use these AN sized aluminum wrenches with our fuel fittings to avoid damaging or scratching during installation. Available in 6AN to 16AN for t...

Use these AN sized aluminum wrenches with our fuel fittings to avoid damaging or scratching during installation. Available in 6AN to 16AN for t...

Use these AN sized aluminum wrenches with our fuel fittings to avoid damaging or scratching during installation. Available in 6AN to 16AN for t...

Use these AN sized aluminum wrenches with our fuel fittings to avoid damaging or scratching during installation. Available in 6AN to 16AN for t...

Use these AN sized aluminum wrenches with our fuel fittings to avoid damaging or scratching during installation. Available in 6AN to 16AN for t...

Just in time for the cold weather. It may be getting cold and cars might be put away but no need to stop representing. Two styles available Bean...

Just in time for the cold weather. It may be getting cold and cars might be put away but no need to stop representing. Two styles available Bean...

Application:   K20A Throttle body K20A2 Throttle body K20A3 Throttle body  K20Z1 Throttle body    The K-Tuned velocity coupler is made from rei...

Application: Add-on The K-Tuned V-Stack combo features a Dry Filter that can be washed and re-oiled. The combo includes: V-Stack (3" or 3.5")...